My triple beam scales have cratered on me, so I'm in the market for some digital scales. I hope someone is using scales that they could recommend. The only brand I'm familiar with is Ohaus, so any…Continue
"I finally finish my mural\grill combo to fill a window on my porch, it is made up of large thick tiles, edge moldings and styles. The tiles have a sculptural stylized flower pattern with cast glass medallions that look like old…"
"Very funny! One of these days I will have to shop at a Trader Joe's if they have characters like you hanging around. I get newspaper ads in the mail from them but no address where they are located. I'm not sure if we have…"
"Don't you just hate it when you made something with some clay you had available and it comes out so great except for the problems from using the wrong clay. I made a 3'x5' wall fountain for my son and used a clay like Little…"
"Thought I would drop in and see how everyone is doing I know everyone has there up and downs. I got a good report that my MS hasn't progressed much in the last 10 years and then blew my knee out a couple of days later. I…"
What is your experience with ceramics in general. (Long answer encouraged)
What is your current involvement with electric fired ceramics? (long answer encouraged)
I have been working in cone 6 since Richard Zakin's first book came out in the early 70"s. Right now I am working on fountains in the cone 1-3 range but as soon as I'm finished with these projects, I go back to Cone 6
All our content is viewable by the public. Why do you want to be a member, when you can already see everything as a non-member?
I am interested in learning how other potters deal with the changing chemistry of glaze chemicals. I"m not a glaze wizard, I make my own glazes but haven't had much luck changing them. I signed up with Ceramic Monthly site thinking I could help someone, but it seems most of the people on it are beginners and need some primary education in ceramics before you can answer their question. Potters who already know the difference between cone 06 and 6 will be easier to exchange info with.
Where do you work on your ceramics projects?
Do you have your own, or participate in other ceramics Websites:
You're right, Denice. MS seems to be a series of steps forward and steps back, but the suppression of the immune process seems to be getting better and more refined. They thought I might have MS when I first had my vision loss because it so commonly affects vision first. All of life though is one step forward and one step back. Keep on making things.
Thank you and no, your comments definately didn't upset me. I was asking for advice and you gave it, and the gallery that offered the advice about changing my work sold a couple of my pieces that went against the advice they gave me! I really think the whole thing comes down to making the work that I love, while I keep working at finding the audience who will love it. So much of it seems to be finding the person who really responds to my style. Can't believe the gallery owner you dealt with would shoot herself in the foot and lose a sale - you're better off not dealing with someone dumb enough to do that to herself and an artist she represents.
and about pricing of the material here lead bi-silicate frit costs me 4250 indian rupee = 71 US$ for 25 kg bag. i checked some other material price also like copper carbonate costs me 4.88 us $ per pound where on that website it is costing you 11.29 $per pound... so of course there is a huge difference in price. and i think it will be for all the materials. only problem here is to get material for studio pottery. we dont have websites like axner or big ceramicstore l where we can get studio pottery related materials and equipments. specially kilns and all we will have to get it made here on our own. thats why i am using gas kilns because its easier to build compare to electric ones..so thats the story...:) its not an easy job for ceramic artists to run the studio :)
Maulik - Digitalfire is one place to find frit equivalents.
This page shows the chemical make-up of Ferro Frit 3110 and at the bottom of this page it says Ferro Frit 3110 is comparable to GF-134, Pemco P1-VO4 etc. What brand frit supplier is common in your area?
I'm curious what lead bisilicate frit costs you for a 25 Kilo bag. In fact I'm curious about your cost for most ceramic raw materials. This website gives a fairly good idea what American prices are, although you can often find cheaper prices on some of these materials.
Increasingly many of our US vendors purchase manufactured raw materials from China.
As an example Alisa Clausen, a potter in Denmark uses many European equivalent frits, but some of the replacements include ingredients like barium which are not in American frits, such as the UK based Johnson Matthey MOK-623 frit. To replace MOK-623 I use the following:
MOK-623 - substitute
As you can see it's almost the same, except my substitute over-supplies Calcium Oxide
In most case my glazes made with this mixture closely resembles her glazes made with MOK-623
we dont use lead but sometime we use lead bi silicate (LBS).. and its available here in india. if i talked about our work then frankly speaking we are just beginner in this field. we are bunch of architects who want to work with their hands rather than computers. we work with gas fired kilns and cone 6 glazes right now but interested in exploring many different techniques in this medium. i will surely try this recipe but only problem with this is the frit 3110.. we get frits here but with different names so i dont know which one to replace with. if you can help in that it will be good thing for me. otherwise all other materials seems familiar. i would love to see your work because we are mostly interested in large scale work which can be a part of architecture which we do. and also if you can share some recipes of claybody for large scale work( hand building and throwing) that will be good.
whatever murals we have done till now are on ready made bisque tiles. we get the tiles and then either spray glazes on them with stencils or we paint it like a normal oil paint paintings. and fire it at a low temperature.. these are very simple glazes made from 90 LBS and 10 china clay with different colorants and oxides. we are planning to do some handmade time murals i will keep you updated with it.. nice to take to you .
thank you very much for liking the work. i find it actually easy to post photos here on this site.. you just have to add photos from your comp and upload it.. i have never visited ceramic monthly forum.. i am finding this website pretty good to discuss work and some problems and many things.. about my raku kiln,,,, no i have not fired my new raku kiln yet i will be firing it soon.. still there is some mechanism has to be fixed for lifting the upper part.. And i will be more than happy to try out THE demuth's purple passion recipe :).. please forward it to me.... if you have any questions regarding our work please ask i will be glad to share my glaze recipes and any other things which we do.. :)
Electroplating directly onto ceramic painted with a conductive coating, or onto a conductive removable mandrell (electroforming) is pretty straight-forward. I've done things like this in college.
The downside is you need to use a concentrated bath of acid, like sulfuric acid, and you end up with a toxic soup of soluble metal contaminants in the acid. So it's not the sort of process we'd want to pursue in our outdoor studio.
Real estate developers using the site of a recently closed chrome plating business in West Hollywood are facing clean-up costs of $1.5 million for the soil under the building.
A cleaner approach for a ceramic studio is PMC "gold clay", "silver clay", or "bronze clay". A moldable and toolable clay-like material which fires to a semi-precious metal. The same company sells metal etching and plating kits if you're not daunted.
It's much like making your own ceramic gilding solution. It's easy enough if you have the right lab equipment - a Hydrogen Sulfide cylinder inside a fume hood (as the gas is poisonous), goggles, an emergency eye wash, gloves, scale, pH paper, glassware, tubing and stoppers.
You bubble the H2S gas through lavender oil until it turns red, or simply start with Turkey Red Oil (sulfated castor oil). Then mix this sulfonated oil thoroughly with three different metal acids:
1.) a precious metal like auric acid (gold(III) chloride), or platinum chloride;
2.) Bismuth Chloride as the bonding agent between the ceramic and the precious metal;
3.) Rhodium Chloride to cover the precious metal. Thin layers of Rhodium are clear and very hard, preventing wear of the gold or platinum.
Ingredients #1 and #3 are very expensive.
Titrate off the oil portion which is your luster to apply to ceramic at ^016. The metals are attached to the oil molecules via the sulfur. Both the oil and the sulfur burn-off in the kiln leaving the thin layer of Rhodium/Gold/Bismuth on the ceramic.
But you're also left with a toxic mess in the remaining water soluble liquid to dispose of, or even more waste liquid if you used sulfuric acid instead of hydrogen sulfide to sulfonate the oil.
You can alter the finished color of the fired gold or platinum gilding by adding very small quantities of chloride of Vanadium, Chromium or Cobalt.
Not having access to the lab set-up, I just buy a 2 gram vial of Duncan Bright Gold for $35.
Wow! That is awesome! I am very new to this stuff, when I first started working with clay about a year and a couple months ago, it just felt right.. almost like I had been doing it my whole life or something like that... I will definitely check out your work as I love to observe and learn as much as possible from professional potters! I was extremely surprised at how my tiles turned out being as it was my first try at them... the only bad thing is they were high fired and some warped so I am thinking about making them into somekind of wall mural or something... any ways I will stop blabbing. By the way are you on facebook I have most of my work up on there: www.facebook.com/sullivan55amanda or my page is
Low cost flat lapping disc can be used on you potters wheel if you, drill bat pin holes in it, and provide a trickle of water to cool it. At amazon.com, 120 grit for aggressive material removal. Click the image to purchase
Members have had great things to say about John Britt's new book, Mid-Range Glazes. Click the image to buy from Amazon.com
If you just want to spout off, it is best accomplished as a blog posting. If you want to get more guidance and ideas from other members, ask a question as a new discussion topic. In the upper right corner of the lists for both types of posting, you will find an "+Add " button. Clicking it will open an editor where you create your posting. 4/16/2014