Carl Ray Crutchfield's Discussions (15)

Discussions Replied To (12) Replies Latest Activity

"I do a bit of glaze trailing with my work. The bottle/tip is designed for oiling sma…"

Carl Ray Crutchfield replied Jan 24, 2017 to Slip trailing

9 Jan 24, 2017
Reply by Lawrence Weathers

"Agreed, George. It is an incredible piece of work and I am really enjoying it."

Carl Ray Crutchfield replied Jan 9, 2015 to John Britt's new cone 4-7 glaze book

4 Jan 9, 2015
Reply by Carl Ray Crutchfield

"exactly the same except chun on pg 81 calls for kaolin instead of ball clay and ther…"

Carl Ray Crutchfield replied Jan 9, 2015 to John Britt's new cone 4-7 glaze book

4 Jan 9, 2015
Reply by Carl Ray Crutchfield

"I would like to post an article based on my own experience of deciding between using…"

Carl Ray Crutchfield replied Jan 7, 2015 to Help Us Organize C6P Glaze Education Days - - - January 15 - February 28, 2015

17 Jan 10, 2015
Reply by Karen Hancock

"I use a small inexpensive spry gun from Harbor Freight. It came with 5 small bottles…"

Carl Ray Crutchfield replied Jan 7, 2015 to Spraying glazes

56 Sep 11, 2016
Reply by Jim Wallace

"dora, have you continued in this search for making your own slips.  I would be inter…"

Carl Ray Crutchfield replied Dec 19, 2012 to Need some engobe help please.

5 Dec 21, 2012
Reply by Kabe Burleson

"I do not get a sharply precise line with my approach as there is normally a very sli…"

Carl Ray Crutchfield replied Oct 27, 2012 to Glazing the rim of a mug when using 2 colors

4 Oct 29, 2012
Reply by Brent Farler

"Interesting post.  I do try to sell on etsy and Ebay also, but my success rate is pa…"

Carl Ray Crutchfield replied Jul 10, 2012 to Getting serious about selling your work.

33 Jul 9, 2014
Reply by Leo Villaroman

""Before I would make a pot and then look for a glaze. I think when I get all these s…"

Carl Ray Crutchfield replied Jun 1, 2012 to Supporting Membership Strengthens and Enhances the C6P network

23 Jul 1, 2012
Reply by George Lewter

"If we wish to make a donation, where might that be found?  -carl"

Carl Ray Crutchfield replied May 31, 2012 to Supporting Membership Strengthens and Enhances the C6P network

23 Jul 1, 2012
Reply by George Lewter

RSS

Videos

  • Add Videos
  • View All

Use These Links to Support Us

Low cost flat lapping disc can be used on you potters wheel if you, drill bat pin holes in it, and provide a trickle of water to cool it. At amazon.com, 120 grit for aggressive material removal. Click the image to purchase 

Members have had great things to say about John Britt's new book, Mid-Range Glazes. Click the image to buy from Amazon.com

Purchase Glazes Cone 6 by Michael Bailey, The Potters Book of Glaze Recipes by Emmanuel Cooper, or Making Marks by Robin Hopper, all available at amazon.comMastering Cone 6 Glazes by John Hesselberth & Ron Roy is now out of print.

Harbor Freight is a great place to find unbeatable prices for better HVLP spray guns with stainless steel parts and serviceable economy models, as well as detail guns, all tested by our members for spraying glazes, as well as compressors to power the guns. As yet no one has tested and commented on the remarkably inexpensive air brushes at harbor freight.

The critter siphon gun is a spray alternative that is well liked by some of our members, and is available at amazon.

Amazon is also a competitive source for photo light tents for shooting professional quality pictures of your work. They also have the EZ Cube brand favored by several of our members. You might also want to purchase the book Photographing Arts, Crafts and Collectibles . . .

If you are up to creating videos of your work or techniques you might want to invest in a flip video camera

Following are a few scales useful for potters. Ohaus Triple Pro Mechanical Triple Beam Balance, 2610g x 0.1g, with Tare $169.00

And finally a low cost clone of the OHaus. The Adam Equipment TBB2610T Triple Beam Mechanical Balance With Tare Beam $99.62

ebay is a great alternative for many tools and the equipment used in the ceramics studio - kilns, wheels, extruders, slab rollers are often listed there both new and used.

Tips for Members

If you just want to spout off, it is best accomplished as a blog posting. If you want to get more guidance and ideas from other members, ask a question as a new discussion topic. In the upper right corner of the lists for both types of posting, you will find an "+Add " button. Clicking it will open an editor where you create your posting. 4/16/2014

© 2024   Created by Andrea Wolf.   Powered by

Badges  |  Report an Issue  |  Terms of Service