Marina Reijsmeijer (Kleierij)'s Discussions (44)

Discussions Replied To (15) Replies Latest Activity

"I watched the video about Ellen Rijsdorp. She does not really say much about the gla…"

Marina Reijsmeijer (Kleierij) replied Sep 23, 2019 to wash glazes

6 Sep 24, 2019
Reply by josi rica

"Hallo Jori, I never heard of a wash glaze. I do know oxide washes. Oxide (copper, ir…"

Marina Reijsmeijer (Kleierij) replied Sep 22, 2019 to wash glazes

6 Sep 24, 2019
Reply by josi rica

"I have used a Bailey Red for a long time. I don't even remember where I found it.  b…"

Marina Reijsmeijer (Kleierij) replied Nov 18, 2018 to Bailey's Red?

7 Nov 27, 2023
Reply by Susan Reys

"What a great discovery. I could not find them at first, but then discovered similar…"

Marina Reijsmeijer (Kleierij) replied Jan 13, 2017 to Slip trailing

9 Jan 24, 2017
Reply by Lawrence Weathers

"Hi Tom Nice to meet you. My clay is a French stoneware clay and with enough oxygen i…"

Marina Reijsmeijer (Kleierij) replied Aug 2, 2016 to What a difference the choice of clay makes.

12 Aug 13, 2016
Reply by George Lewter

"Interesting! I am a coward. I always use the same clay. This makes clay recycling mu…"

Marina Reijsmeijer (Kleierij) replied Jul 27, 2016 to What a difference the choice of clay makes.

12 Aug 13, 2016
Reply by George Lewter

"I did no research on this topic, but my personal experience is that the reduction of…"

Marina Reijsmeijer (Kleierij) replied Jul 23, 2016 to Making art reduces stress hormones ... get potted

3 Jul 23, 2016
Reply by Marina Reijsmeijer (Kleierij)

"I use type K thermocouples and find the cheaper ones in the USA and very expensive o…"

Marina Reijsmeijer (Kleierij) replied Jul 2, 2016 to Type-S thermocouple

4 Jul 2, 2016
Reply by Norm Stuart

"Hi, The only check we do is whether the kiln temperature is below or above the graph…"

Marina Reijsmeijer (Kleierij) replied Jan 13, 2016 to Home grown Kiln controller

12 Jan 13, 2016
Reply by Marina Reijsmeijer (Kleierij)

"Thanks, it is an excellent idea. It will be much more fun to learn to interface with…"

Marina Reijsmeijer (Kleierij) replied Jan 13, 2016 to Home grown Kiln controller

12 Jan 13, 2016
Reply by Marina Reijsmeijer (Kleierij)

RSS

Videos

  • Add Videos
  • View All

Use These Links to Support Us

Low cost flat lapping disc can be used on you potters wheel if you, drill bat pin holes in it, and provide a trickle of water to cool it. At amazon.com, 120 grit for aggressive material removal. Click the image to purchase 

Members have had great things to say about John Britt's new book, Mid-Range Glazes. Click the image to buy from Amazon.com

Purchase Glazes Cone 6 by Michael Bailey, The Potters Book of Glaze Recipes by Emmanuel Cooper, or Making Marks by Robin Hopper, all available at amazon.comMastering Cone 6 Glazes by John Hesselberth & Ron Roy is now out of print.

Harbor Freight is a great place to find unbeatable prices for better HVLP spray guns with stainless steel parts and serviceable economy models, as well as detail guns, all tested by our members for spraying glazes, as well as compressors to power the guns. As yet no one has tested and commented on the remarkably inexpensive air brushes at harbor freight.

The critter siphon gun is a spray alternative that is well liked by some of our members, and is available at amazon.

Amazon is also a competitive source for photo light tents for shooting professional quality pictures of your work. They also have the EZ Cube brand favored by several of our members. You might also want to purchase the book Photographing Arts, Crafts and Collectibles . . .

If you are up to creating videos of your work or techniques you might want to invest in a flip video camera

Following are a few scales useful for potters. Ohaus Triple Pro Mechanical Triple Beam Balance, 2610g x 0.1g, with Tare $169.00

And finally a low cost clone of the OHaus. The Adam Equipment TBB2610T Triple Beam Mechanical Balance With Tare Beam $99.62

ebay is a great alternative for many tools and the equipment used in the ceramics studio - kilns, wheels, extruders, slab rollers are often listed there both new and used.

Tips for Members

If you just want to spout off, it is best accomplished as a blog posting. If you want to get more guidance and ideas from other members, ask a question as a new discussion topic. In the upper right corner of the lists for both types of posting, you will find an "+Add " button. Clicking it will open an editor where you create your posting. 4/16/2014

© 2024   Created by Andrea Wolf.   Powered by

Badges  |  Report an Issue  |  Terms of Service