I am a fairly new potter with a question regarding glazes that separate so badly, it is a constant battle to keep them in suspension. I recently mixed the blue green/ red copper glaze listed on the Ceramic Daily site. It does not stay in suspension long, has to be constantly mixed prior to dipping, and goes on unevenly. I read an article about flocculating glazes and different techniques to help with suspension. But my question is "How do you know how much to add to the glaze?" The article recommended using epsom salts, but did not indicate how much or how do you know when it is too much. Any suggestions?

Views: 2243

Reply to This

Replies to This Discussion

Thank you for the video!

Cyndy,

search John Britt on you tube.  He has another video about adjusting your glazes.  It made a huge difference for me.  I am now able to get my glazes to go on smooth and even with little dripping.  Good luck.

-chantay

I've found Calcium Chloride more effective and easier to use than Epsom Salts (Magnesium Sulfate).  Calcium Chloride absorbs moisture from the air, and gives off heat as it dissolves in water.  The calcium or magnesium (hard water ions) increase the repulsion between clay particles so they suspend the other glaze ingredients. Adding sodium or potassium shorts-out this suspension.

http://www.amazon.com/s/ref=a9_asi_1?rh=i%3Aaps%2Ck%3Acalcium+chlor...

We bought a 9 pound sealed container for the studio which will last for many years.  For a gallon of glaze we just add a sprinkle of 20 to 30 pellets.

If your glaze does not have at least 10% kaolin, clay or clay-like material such as gertley borate, adding calcium or magnesium ions will have no effect.  Since many glaze ingredients, especially nepheline syenite leech sodium or potassium salts, you need to periodically add more calcium or magnesium ions to offset these salts.

Glazes which simply don't have clay you have two choices.  First add a couple of percentage of veegum or even more betonite.  Even this small amount of calcium charged silica can poison some all frit glazes, like cadmium sulfate reds.  So in  those cases you have to rely on an organic gum like xanthan gum to help suspend the glaze and harden it as it dries.

Thank you! I have used a few recipes from John Britt and have loved them. I did not know he had a video. I will definitely spend some time with it.

Thank you Norm! I have copied this so that I have it as a reference in my glaze lab!

Before Jon Britts video I understood what flocculate and deflocculate  but I wasn't really sure why I cared or what to do with it. Now, I find that it solves a number of glaze problems. However, I can assure you that I only do it in private :)

Oh, I agree!

Well, I posted from my phone, but now it is gone. Working from tablet. CYNDY, if I am having trouble adjusting a glaze I pour out a measured amount, like a pint. I then carefully measure additions, keeping notes. Once I have the glaze right I can then calculate adjustments for larger batch. Hope this helps.

Remember that you can easily fix over-flocculation with a deflocculant, or the reverse.  So I think it's better approached by feel and texture, sort of the same way I cook except I can't taste test the glazes the way I can with food. 

With a background in chemistry I was very keen on the quantization of things ceramic, but there are a lot of different and opposing factors at work in making a glaze what you want it to be.  Making it a science would be very complex equation.

In Southern California, the mineral content of our tap water varies during on where our water is being sourced. Colorado River water has more calcium and magnesium so glazes are more flocculated.  But when we receive water sent from Northern California there's less far less calcium and magnesium so we need to add calcium chloride.

And some glaze ingredients, especially nepheline syenite, will slowly leech deflocculating sodium and potassium ions into the glaze so adjustments continue to be needed over time.

Gotcha. I have a similar situation here in Western Virginia. We have a lot of calcium carbonate due to limestone leaching. I try to filter the water prior to making glazes.Thank you for all your help.



Norm Stuart said:

Remember that you can easily fix over-flocculation with a deflocculant, or the reverse.  So I think it's better approached by feel and texture, sort of the same way I cook except I can't taste test the glazes the way I can with food. 

With a background in chemistry I was very keen on the quantization of things ceramic, but there are a lot of different and opposing factors at work in making a glaze what you want it to be.  Making it a science would be very complex equation.

In Southern California, the mineral content of our tap water varies during on where our water is being sourced. Colorado River water has more calcium and magnesium so glazes are more flocculated.  But when we receive water sent from Northern California there's less far less calcium and magnesium so we need to add calcium chloride.

And some glaze ingredients, especially nepheline syenite, will slowly leech deflocculating sodium and potassium ions into the glaze so adjustments continue to be needed over time.

Thank you Chantay! I have learned (mostly the hard way) to keep a glaze diary.

Chantay Poulsen said:

Well, I posted from my phone, but now it is gone. Working from tablet. CYNDY, if I am having trouble adjusting a glaze I pour out a measured amount, like a pint. I then carefully measure additions, keeping notes. Once I have the glaze right I can then calculate adjustments for larger batch. Hope this helps.

Reply to Discussion

RSS

Videos

  • Add Videos
  • View All

Use These Links to Support Us

Low cost flat lapping disc can be used on you potters wheel if you, drill bat pin holes in it, and provide a trickle of water to cool it. At amazon.com, 120 grit for aggressive material removal. Click the image to purchase 

Members have had great things to say about John Britt's new book, Mid-Range Glazes. Click the image to buy from Amazon.com

Purchase Glazes Cone 6 by Michael Bailey, The Potters Book of Glaze Recipes by Emmanuel Cooper, or Making Marks by Robin Hopper, all available at amazon.comMastering Cone 6 Glazes by John Hesselberth & Ron Roy is now out of print.

Harbor Freight is a great place to find unbeatable prices for better HVLP spray guns with stainless steel parts and serviceable economy models, as well as detail guns, all tested by our members for spraying glazes, as well as compressors to power the guns. As yet no one has tested and commented on the remarkably inexpensive air brushes at harbor freight.

The critter siphon gun is a spray alternative that is well liked by some of our members, and is available at amazon.

Amazon is also a competitive source for photo light tents for shooting professional quality pictures of your work. They also have the EZ Cube brand favored by several of our members. You might also want to purchase the book Photographing Arts, Crafts and Collectibles . . .

If you are up to creating videos of your work or techniques you might want to invest in a flip video camera

Following are a few scales useful for potters. Ohaus Triple Pro Mechanical Triple Beam Balance, 2610g x 0.1g, with Tare $169.00

And finally a low cost clone of the OHaus. The Adam Equipment TBB2610T Triple Beam Mechanical Balance With Tare Beam $99.62

ebay is a great alternative for many tools and the equipment used in the ceramics studio - kilns, wheels, extruders, slab rollers are often listed there both new and used.

Tips for Members

If you just want to spout off, it is best accomplished as a blog posting. If you want to get more guidance and ideas from other members, ask a question as a new discussion topic. In the upper right corner of the lists for both types of posting, you will find an "+Add " button. Clicking it will open an editor where you create your posting. 4/16/2014

© 2024   Created by Andrea Wolf.   Powered by

Badges  |  Report an Issue  |  Terms of Service