I just read an internet discussion where potters were talking about reconstituting dried clay and some suggestions were offered for ways to wedge the clay that were a little less taxing physically.  One person suggested getting students to do it as part of their learning which is a great idea if you happen to have students!  

For the rest of us, my method of choice is to save my scraps from slab building (I use my clay fresh from the box and nicely pre-wedged for the slabs), in a 1 or 2 litre plastic case with a tight lid.  I spray my scraps with a little water as I add them to keep them nice and moist.  When I have a case of scraps, I switch and coil build until I use my scraps up, wedging the coils by rolling them out, folding them and re-rolling them a couple of times.  I spray them with water as I go which gives me nice soft coils to work with.

This is also a great way to 'wedge' clay and can be used for large amounts of it, depending on how strong you are https://www.youtube.com/watch?v=HApNjUnI9U4

Views: 175

Replies to This Discussion

I try to limit my scraps. When trimming, all the clay bits used, esp. for holding pots etc, goes into a plastic bag  I keep by my wheel. Any left overs from handbuilding goes into that bag as well and I then add a bit of water. Why slake all this down  and wedge it when all it needs now is somewhat limited wedging. It really helps to save my shoulders.

RSS

Videos

  • Add Videos
  • View All

Use These Links to Support Us

Low cost flat lapping disc can be used on you potters wheel if you, drill bat pin holes in it, and provide a trickle of water to cool it. At amazon.com, 120 grit for aggressive material removal. Click the image to purchase 

Members have had great things to say about John Britt's new book, Mid-Range Glazes. Click the image to buy from Amazon.com

Purchase Glazes Cone 6 by Michael Bailey, The Potters Book of Glaze Recipes by Emmanuel Cooper, or Making Marks by Robin Hopper, all available at amazon.comMastering Cone 6 Glazes by John Hesselberth & Ron Roy is now out of print.

Harbor Freight is a great place to find unbeatable prices for better HVLP spray guns with stainless steel parts and serviceable economy models, as well as detail guns, all tested by our members for spraying glazes, as well as compressors to power the guns. As yet no one has tested and commented on the remarkably inexpensive air brushes at harbor freight.

The critter siphon gun is a spray alternative that is well liked by some of our members, and is available at amazon.

Amazon is also a competitive source for photo light tents for shooting professional quality pictures of your work. They also have the EZ Cube brand favored by several of our members. You might also want to purchase the book Photographing Arts, Crafts and Collectibles . . .

If you are up to creating videos of your work or techniques you might want to invest in a flip video camera

Following are a few scales useful for potters. Ohaus Triple Pro Mechanical Triple Beam Balance, 2610g x 0.1g, with Tare $169.00

And finally a low cost clone of the OHaus. The Adam Equipment TBB2610T Triple Beam Mechanical Balance With Tare Beam $99.62

ebay is a great alternative for many tools and the equipment used in the ceramics studio - kilns, wheels, extruders, slab rollers are often listed there both new and used.

Tips for Members

If you just want to spout off, it is best accomplished as a blog posting. If you want to get more guidance and ideas from other members, ask a question as a new discussion topic. In the upper right corner of the lists for both types of posting, you will find an "+Add " button. Clicking it will open an editor where you create your posting. 4/16/2014

© 2024   Created by Andrea Wolf.   Powered by

Badges  |  Report an Issue  |  Terms of Service