I would like to know what others recommend for their choice in a pyrometer and why. I don't have one yet and there seems to be a lot of options with little information.

Views: 227

Reply to This

Replies to This Discussion

I use a Radio Shack digital Multimeter that displays 1/10ths of millivolts attached to a type K thermocouple extended about 4" into the kiln. Using a Type K millivolt to temperature chart (available free on the internet), I convert the displayed millivolts to a temperature reading. I spent $25 for the multimeter, and about $3 for the thermocouple on ebay. Why? Because it works, and I'm a cheapskate.
I will check this out. I will try to put one together this week and I will let you know how it goes. Have you ever used one made to do this?
I used an analog needle type pyrometer in the old days. It worked but wasn't very helpful for less than about 30 degrees due to spreading 2500 degrees over a 3" scale
I would need more information on the 3.00 thermocouple on ebay, everything I saw there was very expensive. I have a better multimeter, do I need to take it apart or does the thermcouple plug into it?
I put alligator clips on my meter probes & clip them to the two sides of the thermocouple. The thermocouples I got may have been surplus. Try googling them

Terry Fallon sells a portable, heavy duty pyrometer for $80 on his fascinating fallonator website. See the discussions here on electric reduction kilns. If you use a manual kiln you really need a pyrometer to monitor and control your firings. If you have a programmable kiln, you will need a replacement thermocouple probe at some point. He sells type K and type S probes.

http://fallonator.com/products/high_temperature_pyrometer

Lower cost (replace more frequently) thermocouple probes are available on ebay such as this listing for $13.99

For the real cheapskates, you can buy a electronic multimeter for about $20 and connect it to a type K thermocouple probe that extends through peepholes into your kiln. As the kiln heats the thermocouple generates millivolt current that you read on your meter. Consulting a conversion chart, you can get a  temperature reading for that voltage and know the temperature inside the kiln. I did this for 3 years before I bit the bullet and bought my add-on programmable kiln controller.

Thanks for the follow up, I appreciate it! I found a really nice deal on Ebay. I picked up a reconditioned digital pyrometer for $85. It has worked great for a year now. I wish I had bought a couple more. I do keep looking at the fallonator website. Lots of interesting stuff there.

Reply to Discussion

RSS

Videos

  • Add Videos
  • View All

Use These Links to Support Us

Low cost flat lapping disc can be used on you potters wheel if you, drill bat pin holes in it, and provide a trickle of water to cool it. At amazon.com, 120 grit for aggressive material removal. Click the image to purchase 

Members have had great things to say about John Britt's new book, Mid-Range Glazes. Click the image to buy from Amazon.com

Purchase Glazes Cone 6 by Michael Bailey, The Potters Book of Glaze Recipes by Emmanuel Cooper, or Making Marks by Robin Hopper, all available at amazon.comMastering Cone 6 Glazes by John Hesselberth & Ron Roy is now out of print.

Harbor Freight is a great place to find unbeatable prices for better HVLP spray guns with stainless steel parts and serviceable economy models, as well as detail guns, all tested by our members for spraying glazes, as well as compressors to power the guns. As yet no one has tested and commented on the remarkably inexpensive air brushes at harbor freight.

The critter siphon gun is a spray alternative that is well liked by some of our members, and is available at amazon.

Amazon is also a competitive source for photo light tents for shooting professional quality pictures of your work. They also have the EZ Cube brand favored by several of our members. You might also want to purchase the book Photographing Arts, Crafts and Collectibles . . .

If you are up to creating videos of your work or techniques you might want to invest in a flip video camera

Following are a few scales useful for potters. Ohaus Triple Pro Mechanical Triple Beam Balance, 2610g x 0.1g, with Tare $169.00

And finally a low cost clone of the OHaus. The Adam Equipment TBB2610T Triple Beam Mechanical Balance With Tare Beam $99.62

ebay is a great alternative for many tools and the equipment used in the ceramics studio - kilns, wheels, extruders, slab rollers are often listed there both new and used.

Tips for Members

If you just want to spout off, it is best accomplished as a blog posting. If you want to get more guidance and ideas from other members, ask a question as a new discussion topic. In the upper right corner of the lists for both types of posting, you will find an "+Add " button. Clicking it will open an editor where you create your posting. 4/16/2014

© 2024   Created by Andrea Wolf.   Powered by

Badges  |  Report an Issue  |  Terms of Service