Hi!

How do I apply washes to enhance the look of a glaze? Could you recommend any good online tutorial or have any tips to share?

For what I have read this world be a possible process:

·Bisque fire the piece

·Apply the oxide wash with a brush or sponge and wipe off excess

·Let dry one day (or longer if needed)

·Glaze as usual

Could also be done on top of the glaze? Would not the glaze be "washed away"?

Thank you so much!

Views: 227

Reply to This

Replies to This Discussion

Our member Carl Cructhfield probably uses stains and oxide washes more regularly than most of us. Check his work. 

You can download a free booklet from ceramic arts network daily on stains and washes. Go to 
https://ceramicartsnetwork.org/daily/ceramic-supplies/ceramic-color...

Washes over glaze have modifying effects which can unintentionally cause glaze instability and leaching of metal oxides into food, so don't do it on food contact surfaces.

On bisque ware, under the glaze you can wipe away to give greater depth and variance in the color. You may risk crawling but I have not seen it. Over the glaze you can dilute it and use as you would water color painting (same for under as well). You can do a wash on raw clay as well but if you wipe away you are going to have a problem with wiping away clay and accentuating the grog or roughening up the surface. 

Thank you Donna!

Thank you.

I do a lot of washes in my work. I have this recipe I learned in university. It is my go to recipe. Kingsmill Wash - 33% red iron oxide, 33% Alberta slip, 33% Bannard clay. Sometimes clear glazes can absorb the iron in varying degrees. The cup shows that under the blue, plus what the wash looks like without glaze. I bisque my greenware, apply wash, wash off excess, wax what I do not want glazed, dry overnight, then glaze. I do a lot of hand painting on glaze, and the wash doesn't pick up into the wet glaze.

Attachments:

Reply to Discussion

RSS

Videos

  • Add Videos
  • View All

Use These Links to Support Us

Low cost flat lapping disc can be used on you potters wheel if you, drill bat pin holes in it, and provide a trickle of water to cool it. At amazon.com, 120 grit for aggressive material removal. Click the image to purchase 

Members have had great things to say about John Britt's new book, Mid-Range Glazes. Click the image to buy from Amazon.com

Purchase Glazes Cone 6 by Michael Bailey, The Potters Book of Glaze Recipes by Emmanuel Cooper, or Making Marks by Robin Hopper, all available at amazon.comMastering Cone 6 Glazes by John Hesselberth & Ron Roy is now out of print.

Harbor Freight is a great place to find unbeatable prices for better HVLP spray guns with stainless steel parts and serviceable economy models, as well as detail guns, all tested by our members for spraying glazes, as well as compressors to power the guns. As yet no one has tested and commented on the remarkably inexpensive air brushes at harbor freight.

The critter siphon gun is a spray alternative that is well liked by some of our members, and is available at amazon.

Amazon is also a competitive source for photo light tents for shooting professional quality pictures of your work. They also have the EZ Cube brand favored by several of our members. You might also want to purchase the book Photographing Arts, Crafts and Collectibles . . .

If you are up to creating videos of your work or techniques you might want to invest in a flip video camera

Following are a few scales useful for potters. Your final price could be less or more - things change.

American Weigh Black Blade Digital Scale, 1000g X 0.1g $11.08 

For the non-digitally inclined the old standard Ohaus Triple Pro Mechanical Triple Beam Balance, 2610g x 0.1g, with Tare $169.00

And finally a low cost clone of the OHaus. The Adam Equipment TBB2610T Triple Beam Mechanical Balance With Tare Beam $99.62

ebay is a great alternative for many tools and the equipment used in the ceramics studio - kilns, wheels, extruders, slab rollers are often listed there both new and used.

Tips for Members

If you just want to spout off, it is best accomplished as a blog posting. If you want to get more guidance and ideas from other members, ask a question as a new discussion topic. In the upper right corner of the lists for both types of posting, you will find an "+Add " button. Clicking it will open an editor where you create your posting. 4/16/2014

© 2021   Created by George Lewter.   Powered by

Badges  |  Report an Issue  |  Terms of Service