Does anyone know where to get the type of spray gun containers that Steven Hill displayed in his video? I would love to get several of them for my gravity feed spray gun! Much better than buying a spray gun for each glaze!

Views: 984

Reply to This

Replies to This Discussion

Linda

I've seen some at Harbor Freight but have never tried them on my spray gun to see if they fit.

Rich Hoffman

I know in his workshops he recommends guns from TCP Global such as this set:

tcp global spray gun set

The DevilBiss DeKups Disposable Cup System may be the system in his video (I have not seen the video)

I would call and ask if they also carry the adapters for your spraygun (these are at the bottom of the page.)  I should think the disk filter could be tossed as most glazes will clog a filter.

John Lowes

Note: This post edited by George Lewter. John's links above to TCP Global were broken. After finding the products on the TCP Global website, I noticed the same products costing less at Amazon, so I redirected the links there. 9/7/2014

I haven't seen those there, good heads up for my next visit.

The ones pictured in his video were ones with a plug for the hole in each end of the cup and a stand to store the cup. 

TCP Global guns are now available at Amazon.com. If you order via these links, the cone6pots network will earn a small commission on your order.

TCP Global® Brand Professional HVLP Spray Gun with 1.4mm Fluid Tip ...

This is a good tip size for glazes sieved at 60 mesh or finer. At the time of this posting it ships free to Amazon Prime members. Price at the time of this posting - $39.96

TCP Global® Brand HVLP Spray Gun Set - 3 Sprayguns with Cups, Air Regulator, Stand, & Maintenance Kit for all Auto Paint, Primer, Topcoat & Touch-Up, One Year Warranty

This might be a good setup for someone serious about spraying layered glazes. Two sizes of tips (1.4 & 1.8 mm) for base coat and general glaze application, and a detail gun for smaller areas. Note that the detail gun is not an airbrush, and will not be making 1/8 inch lines. This set ships free with Amazon Prime membership. Price at the time of this posting - $69.96

I'm not a fan of HF, but the reviews on these disposable paint cups are pretty good. They come with adapters to fit most HVLP paint guns, and you can always use a bit of teflon tape on the threads for leaks. For less than the price of lunch  you get 5 disposable plastic paint cups - I might give this a try. http://www.harborfreight.com/5-piece-air-spray-gun-disposable-paint...

I think SH shows the Titan Paint Cups in his surface video - about $10-15 each.

I like to use the DeKups disposable cups system for my spraying. This allows you to interchange the glazes without having to use multiple spray guns. In addition, you can store glazes for a short time in them if doing multiple days of glazing. I purchased them from TCPGlobal.com.

Reply to Discussion

RSS

Videos

  • Add Videos
  • View All

Use These Links to Support Us

Low cost flat lapping disc can be used on you potters wheel if you, drill bat pin holes in it, and provide a trickle of water to cool it. At amazon.com, 120 grit for aggressive material removal. Click the image to purchase 

Members have had great things to say about John Britt's new book, Mid-Range Glazes. Click the image to buy from Amazon.com

Purchase Glazes Cone 6 by Michael Bailey, The Potters Book of Glaze Recipes by Emmanuel Cooper, or Making Marks by Robin Hopper, all available at amazon.comMastering Cone 6 Glazes by John Hesselberth & Ron Roy is now out of print.

Harbor Freight is a great place to find unbeatable prices for better HVLP spray guns with stainless steel parts and serviceable economy models, as well as detail guns, all tested by our members for spraying glazes, as well as compressors to power the guns. As yet no one has tested and commented on the remarkably inexpensive air brushes at harbor freight.

The critter siphon gun is a spray alternative that is well liked by some of our members, and is available at amazon.

Amazon is also a competitive source for photo light tents for shooting professional quality pictures of your work. They also have the EZ Cube brand favored by several of our members. You might also want to purchase the book Photographing Arts, Crafts and Collectibles . . .

If you are up to creating videos of your work or techniques you might want to invest in a flip video camera

Following are a few scales useful for potters. Your final price could be less or more - things change.

American Weigh Black Blade Digital Scale, 1000g X 0.1g $11.08 

For the non-digitally inclined the old standard Ohaus Triple Pro Mechanical Triple Beam Balance, 2610g x 0.1g, with Tare $169.00

And finally a low cost clone of the OHaus. The Adam Equipment TBB2610T Triple Beam Mechanical Balance With Tare Beam $99.62

ebay is a great alternative for many tools and the equipment used in the ceramics studio - kilns, wheels, extruders, slab rollers are often listed there both new and used.

Tips for Members

If you just want to spout off, it is best accomplished as a blog posting. If you want to get more guidance and ideas from other members, ask a question as a new discussion topic. In the upper right corner of the lists for both types of posting, you will find an "+Add " button. Clicking it will open an editor where you create your posting. 4/16/2014

© 2021   Created by George Lewter.   Powered by

Badges  |  Report an Issue  |  Terms of Service