My glazes have been acting ...... peculiar ,   lately.

and I read this on Facebook.  Please consider the source, so I come here for verification.

"Gerstley borate can be substituted for Frit 3134 and is half the price. Today's Gerstley borate tends to cause gelling, so about 1 drop of Darvan per 100 g recipe may be needed during mixing to get it to go through the sieve, or later after it has sat for a while and more solubles have come into solution."

So is it possible that my glazes containing current gerstley are gelling up and covering poorly due to the above?

If so, are we to watch out for this and for the Thixotropic change?    I swear my glazes used to just work.

Appreciate any input as glazes too thick or too thin is a problem.

Views: 46

Reply to This

Replies to This Discussion

Tony Hansen has a video on intentionally gelling a glaze, like it's a positive thing.
https://www.youtube.com/watch?v=Ck_69eGJons 

Linda Arbuckle has another than goes more into the rationale and differences in glazes and when to do so.
https://www.youtube.com/watch?v=Uuh1NqLfMzw

More from John Britt
https://www.youtube.com/watch?v=fpQns05RdVU

I had a serious problem with this when they changed the final batch of Gerstley. It had never happened before. It only became an issue though when members would add water to the glaze, thinking it was too thick. Then of course the glaze would still go on thick but would dry up like a lake bed forming large cracks. Once I was able to get people to weigh the glaze and use a deflocculant when needed things were fine. IMO weighing a specified volume of glaze is critical to keeping application consistent. 

Reply to Discussion

RSS

Videos

  • Add Videos
  • View All

Use These Links to Support Us

Low cost flat lapping disc can be used on you potters wheel if you, drill bat pin holes in it, and provide a trickle of water to cool it. At amazon.com, 120 grit for aggressive material removal. Click the image to purchase 

Members have had great things to say about John Britt's new book, Mid-Range Glazes. Click the image to buy from Amazon.com

Purchase Glazes Cone 6 by Michael Bailey, The Potters Book of Glaze Recipes by Emmanuel Cooper, or Making Marks by Robin Hopper, all available at amazon.comMastering Cone 6 Glazes by John Hesselberth & Ron Roy is now out of print.

Harbor Freight is a great place to find unbeatable prices for better HVLP spray guns with stainless steel parts and serviceable economy models, as well as detail guns, all tested by our members for spraying glazes, as well as compressors to power the guns. As yet no one has tested and commented on the remarkably inexpensive air brushes at harbor freight.

The critter siphon gun is a spray alternative that is well liked by some of our members, and is available at amazon.

Amazon is also a competitive source for photo light tents for shooting professional quality pictures of your work. They also have the EZ Cube brand favored by several of our members. You might also want to purchase the book Photographing Arts, Crafts and Collectibles . . .

If you are up to creating videos of your work or techniques you might want to invest in a flip video camera

Following are a few scales useful for potters. Your final price could be less or more - things change.

American Weigh Black Blade Digital Scale, 1000g X 0.1g $11.08 

For the non-digitally inclined the old standard Ohaus Triple Pro Mechanical Triple Beam Balance, 2610g x 0.1g, with Tare $169.00

And finally a low cost clone of the OHaus. The Adam Equipment TBB2610T Triple Beam Mechanical Balance With Tare Beam $99.62

ebay is a great alternative for many tools and the equipment used in the ceramics studio - kilns, wheels, extruders, slab rollers are often listed there both new and used.

Tips for Members

If you just want to spout off, it is best accomplished as a blog posting. If you want to get more guidance and ideas from other members, ask a question as a new discussion topic. In the upper right corner of the lists for both types of posting, you will find an "+Add " button. Clicking it will open an editor where you create your posting. 4/16/2014

© 2021   Created by George Lewter.   Powered by

Badges  |  Report an Issue  |  Terms of Service