HELP...!  I can use some help with glaze trouble I am having. I am putting Standard Iron red Over Standard Cream. These are both new glazes for me and The Cream is Going on quite chalky, and the Ion red is dry cracking and lifting off... I am Pouring the cream on and a dip or the ion red... Is there anything I can add to make this work better?  Thank you

Views: 102

Comment

You need to be a member of Electric Mid&Hi Fired Ceramics to add comments!

Join Electric Mid&Hi Fired Ceramics

Comment by Sharlene Sieloff on April 26, 2013 at 6:22pm

Hello Robert,

I am new to Standard Glazes and just found out about them when watching You Tube videos with Janice the Potter. She uses Iron Red and Cream and has good visual results... check her out for yourself and I think you will enjoy her extensive glaze testing.  You might ask her for help and I think she would be happy to comply.  Good luck.

Shar     http://www.etsy.com/shop/SharsArtPottery

Comment by Robert Serva on April 17, 2013 at 6:31pm

Thank you for the help, I will give this a try. I checked the cream and yes, it has settled to a hard sediment. I will mixed very well before use.   Thanks again.

Comment by Cindy C. on April 15, 2013 at 7:19pm

Hi Robert, I use both these glazes, quite frequently.  The cream definitely settles to the bottom.  Needs to be mixed very well, deflocculating is definitely something to look into.   I do find that if I'm not careful the Iron Red will flake off when applied on top of other glazes.  I don't touch it once it's on.   Are you making sure that the first glaze has completely dried, maybe even wait until the next day before applying the iron red.  That may help.  Try applying the iron red around the rim first, then applying the creme, this is what I often do.  Not sure if you have tried this combo before, but beware of the glaze running.  Cream will definitely run, I usually just use it on rims.  Hope this helps.  

Comment by Robert Serva on April 15, 2013 at 6:54pm

Thank you, I will try this... The mix seems about the same constancy as many other glazes I have but they sure do not go on so chalky.... I was wondering if there was something that could be added to a glaze to make it less Chalky and not dry so fast, maybe make it flow better?

Videos

  • Add Videos
  • View All

Use These Links to Support Us

Low cost flat lapping disc can be used on you potters wheel if you, drill bat pin holes in it, and provide a trickle of water to cool it. At amazon.com, 120 grit for aggressive material removal. Click the image to purchase 

Members have had great things to say about John Britt's new book, Mid-Range Glazes. Click the image to buy from Amazon.com

Purchase Glazes Cone 6 by Michael Bailey, The Potters Book of Glaze Recipes by Emmanuel Cooper, or Making Marks by Robin Hopper, all available at amazon.comMastering Cone 6 Glazes by John Hesselberth & Ron Roy is now out of print.

Harbor Freight is a great place to find unbeatable prices for better HVLP spray guns with stainless steel parts and serviceable economy models, as well as detail guns, all tested by our members for spraying glazes, as well as compressors to power the guns. As yet no one has tested and commented on the remarkably inexpensive air brushes at harbor freight.

The critter siphon gun is a spray alternative that is well liked by some of our members, and is available at amazon.

Amazon is also a competitive source for photo light tents for shooting professional quality pictures of your work. They also have the EZ Cube brand favored by several of our members. You might also want to purchase the book Photographing Arts, Crafts and Collectibles . . .

If you are up to creating videos of your work or techniques you might want to invest in a flip video camera

Following are a few scales useful for potters. Ohaus Triple Pro Mechanical Triple Beam Balance, 2610g x 0.1g, with Tare $169.00

And finally a low cost clone of the OHaus. The Adam Equipment TBB2610T Triple Beam Mechanical Balance With Tare Beam $99.62

ebay is a great alternative for many tools and the equipment used in the ceramics studio - kilns, wheels, extruders, slab rollers are often listed there both new and used.

Tips for Members

If you just want to spout off, it is best accomplished as a blog posting. If you want to get more guidance and ideas from other members, ask a question as a new discussion topic. In the upper right corner of the lists for both types of posting, you will find an "+Add " button. Clicking it will open an editor where you create your posting. 4/16/2014

© 2024   Created by Andrea Wolf.   Powered by

Badges  |  Report an Issue  |  Terms of Service