What is your experience with ceramics in general. (Long answer encouraged)
What is your current involvement with electric fired ceramics? (long answer encouraged)
I used gas fire cone 10 reduction exclusively for 9 years. Now I have gone to electric as I have no further access to a gas kiln. I have done lots of research and gone to a few Cone 6 workshops. I have had great success in the few electric firings I've done. I know this sight will further help in my cone 6 experience as I also hope to add to the discussion.
All our content is viewable by the public. Why do you want to be a member, when you can already see everything as a non-member?
Discussion of successes and what not to do. Sharing of glaze recipes and firing schedules. Also sharing of information for upcoming workshops. I'm looking for community of people that are interested in the same process in which I am.
Where do you work on your ceramics projects?
How did you find this network?
referred by friend
You need to be a member of Electric Mid&Hi Fired Ceramics to add comments!
Low cost flat lapping disc can be used on you potters wheel if you, drill bat pin holes in it, and provide a trickle of water to cool it. At amazon.com, 120 grit for aggressive material removal. Click the image to purchase
Members have had great things to say about John Britt's new book, Mid-Range Glazes. Click the image to buy from Amazon.com
If you just want to spout off, it is best accomplished as a blog posting. If you want to get more guidance and ideas from other members, ask a question as a new discussion topic. In the upper right corner of the lists for both types of posting, you will find an "+Add " button. Clicking it will open an editor where you create your posting. 4/16/2014