Potters & Sculptors - Making Rock from Mud
Comment
We have a Shino that we can use to dip....it's a brown shino, not their light. I may try your method. I don't have Iron Red...I've never tried Standard and just found out recently that you can only buy them in dry form?? But I may try your method with another color in place of the Iron Red. I love in particular the mug in the picture along with the lower part of a bowl, maybe a colander? Also like the two mugs but my favorite was that first one in the picture with the bowl. I am using a white clay now but it's Lagune B-mix and that's a smooth white so maybe I'll get something similar! Thanks for your time in replying...
Thank you, and I don't mind the questions! I used Coyote's regular Shino. I do have Light Shino as well, and it's much lighter, almost like a cream. Funny thing about these particular ones is that after I dipped iron red (which isn't thick), I dipped it part way down with Shino, then brushed the rest. That's why the colour variation near the bottom. The only reason why I did this was because it was my first batch of Shino that I mixed, and was worried that it was going on too thick, and would run. But my next firing, the set of mugs which have been recently posted, I dipped all in Shino. Brushing and dipping make a huge difference with this Shino. I use Tucker's Clay, Smooth White most of the time. Hope this helps!
The Iron Red and Shino are beautiful. I used to use Coyote but had trouble brushing and I only had their pints. Did you also dip into the shino and was it their light shino or just regular shino? I've been trying to find a shino I like and may buy enough of Coyote to dip. Sorry for all the quesitons but I love this and have really been working to find a good Shino. Also, if you dipped Iron Red and also then dipped over it with the shino, I guess they were pretty thin. I worked on a shino combination this weekend and two dips were way too thick no matter how thin they seemed. One last question. Do you know what clay you used? Thanks so much...Beautiful work!
Thank you, the rim was first dipped in Iron Red (Standard Ceramics), then the whole piece in Shino.
Beautiful glaze effect. Is this Shino?
Low cost flat lapping disc can be used on you potters wheel if you, drill bat pin holes in it, and provide a trickle of water to cool it. At amazon.com, 120 grit for aggressive material removal. Click the image to purchase
Members have had great things to say about John Britt's new book, Mid-Range Glazes. Click the image to buy from Amazon.com
Purchase Glazes Cone 6 by Michael Bailey, The Potters Book of Glaze Recipes by Emmanuel Cooper, or Making Marks by Robin Hopper, all available at amazon.com. Mastering Cone 6 Glazes by John Hesselberth & Ron Roy is now out of print.
Harbor Freight is a great place to find unbeatable prices for better HVLP spray guns with stainless steel parts and serviceable economy models, as well as detail guns, all tested by our members for spraying glazes, as well as compressors to power the guns. As yet no one has tested and commented on the remarkably inexpensive air brushes at harbor freight.
The critter siphon gun is a spray alternative that is well liked by some of our members, and is available at amazon.
Amazon is also a competitive source for photo light tents for shooting professional quality pictures of your work. They also have the EZ Cube brand favored by several of our members. You might also want to purchase the book Photographing Arts, Crafts and Collectibles . . .
If you are up to creating videos of your work or techniques you might want to invest in a flip video camera
Following are a few scales useful for potters. Ohaus Triple Pro Mechanical Triple Beam Balance, 2610g x 0.1g, with Tare $169.00
And finally a low cost clone of the OHaus. The Adam Equipment TBB2610T Triple Beam Mechanical Balance With Tare Beam $99.62
ebay is a great alternative for many tools and the equipment used in the ceramics studio - kilns, wheels, extruders, slab rollers are often listed there both new and used.
If you just want to spout off, it is best accomplished as a blog posting. If you want to get more guidance and ideas from other members, ask a question as a new discussion topic. In the upper right corner of the lists for both types of posting, you will find an "+Add " button. Clicking it will open an editor where you create your posting. 4/16/2014
© 2024 Created by Andrea Wolf. Powered by
You need to be a member of Electric Mid&Hi Fired Ceramics to add comments!
Join Electric Mid&Hi Fired Ceramics