Van Gilder Red w/Tenmoku

Views: 105

Comment

You need to be a member of Electric Mid&Hi Fired Ceramics to add comments!

Join Electric Mid&Hi Fired Ceramics

Comment by Nadine Mercader on July 23, 2012 at 11:03am

Good luck with it.  I can't wait to see the photos.

Comment by Jeff Poulter on July 23, 2012 at 9:13am
I actually lied! I just reviewed the program and it was fast cone 5 with a 15 min hold then fast to 950c and then a 60 min hold. They all just went into a fast 06 bisque so I should have more pics tomorrow. That bottle would be more red right now except for the little bit of coyote tenmoku that I sprayed over it. You can see it is a little heavier near the top. I put it on because it reacts really well(hopefully) with the wash that I will put over it. jhp
Comment by Nadine Mercader on July 23, 2012 at 8:53am

I think it is superb!  That is exactly the red that I am trying to create.  I would be thrilled with it as is.  

Comment by Jeff Poulter on July 23, 2012 at 8:02am
Thanks Nadine
Yes it is at cone 6 ox. I do a 60 min hold at 950c. Next I will put it in a bisque to see if I can coax a little more red out of it. Then I will spray the wash on and refire to cone 6 again. Will post pics. jhp
Comment by Nadine Mercader on July 22, 2012 at 9:55pm

Are you firing this at cone 6 oxidation?  IT IS GORGEOUS!

Videos

  • Add Videos
  • View All

Use These Links to Support Us

Low cost flat lapping disc can be used on you potters wheel if you, drill bat pin holes in it, and provide a trickle of water to cool it. At amazon.com, 120 grit for aggressive material removal. Click the image to purchase 

Members have had great things to say about John Britt's new book, Mid-Range Glazes. Click the image to buy from Amazon.com

Purchase Glazes Cone 6 by Michael Bailey, The Potters Book of Glaze Recipes by Emmanuel Cooper, or Making Marks by Robin Hopper, all available at amazon.comMastering Cone 6 Glazes by John Hesselberth & Ron Roy is now out of print.

Harbor Freight is a great place to find unbeatable prices for better HVLP spray guns with stainless steel parts and serviceable economy models, as well as detail guns, all tested by our members for spraying glazes, as well as compressors to power the guns. As yet no one has tested and commented on the remarkably inexpensive air brushes at harbor freight.

The critter siphon gun is a spray alternative that is well liked by some of our members, and is available at amazon.

Amazon is also a competitive source for photo light tents for shooting professional quality pictures of your work. They also have the EZ Cube brand favored by several of our members. You might also want to purchase the book Photographing Arts, Crafts and Collectibles . . .

If you are up to creating videos of your work or techniques you might want to invest in a flip video camera

Following are a few scales useful for potters. Ohaus Triple Pro Mechanical Triple Beam Balance, 2610g x 0.1g, with Tare $169.00

And finally a low cost clone of the OHaus. The Adam Equipment TBB2610T Triple Beam Mechanical Balance With Tare Beam $99.62

ebay is a great alternative for many tools and the equipment used in the ceramics studio - kilns, wheels, extruders, slab rollers are often listed there both new and used.

Tips for Members

If you just want to spout off, it is best accomplished as a blog posting. If you want to get more guidance and ideas from other members, ask a question as a new discussion topic. In the upper right corner of the lists for both types of posting, you will find an "+Add " button. Clicking it will open an editor where you create your posting. 4/16/2014

© 2026   Created by Andrea Wolf.   Powered by

Badges  |  Report an Issue  |  Terms of Service