June Perry's Discussions (39)

Discussions Replied To (16) Replies Latest Activity

"Sylvia, that recipe, with the added silica is lovely, but it will never drip like a…"

June Perry replied Apr 19, 2012 to The Companion Glazes - Modifiers and Complements to SCM

46 Sep 29, 2017
Reply by Norm Stuart

"Arthur, that amount of silica is actually 0.1 moles less than the minimum for a good…"

June Perry replied Apr 18, 2012 to The Companion Glazes - Modifiers and Complements to SCM

46 Sep 29, 2017
Reply by Norm Stuart

"Actually, the silica isn't too high for a cone 6 glaze. It's 2.4 and the minimum in…"

June Perry replied Apr 17, 2012 to The Companion Glazes - Modifiers and Complements to SCM

46 Sep 29, 2017
Reply by Norm Stuart

"Thanks Karen. It will be a while before I can get back to work - how long I don't kn…"

June Perry replied Feb 21, 2012 to Cone 6 firing schedule for SCM etc glazes

23 Jun 27, 2013
Reply by Norm Stuart

"You're welcome Karen! We tested some of them in soda but the kiln didn't get up to t…"

June Perry replied Feb 18, 2012 to Cone 6 firing schedule for SCM etc glazes

23 Jun 27, 2013
Reply by Norm Stuart

"Both carb and oxide will color the same. The carbonate is just weaker - about 64% or…"

June Perry replied Jan 15, 2012 to The Companion Glazes - Modifiers and Complements to SCM

46 Sep 29, 2017
Reply by Norm Stuart

"Thanks Belinda. I 'll have to try that one."

June Perry replied Dec 13, 2011 to Cone 6 firing schedule for SCM etc glazes

23 Jun 27, 2013
Reply by Norm Stuart

"Regarding Pier Black: Try subbing a soda spar like Kona F4 or NC 4 or Minspar for th…"

June Perry replied Jul 9, 2011 to The Companion Glazes - Modifiers and Complements to SCM

46 Sep 29, 2017
Reply by Norm Stuart

"Good luck with the firing. Mine is about two weeks off. I have a lot of glazes to ba…"

June Perry replied Jul 6, 2011 to Cone 6 firing schedule for SCM etc glazes

23 Jun 27, 2013
Reply by Norm Stuart

"Thanks so much Robert! This was a big help!I've made a note of both schedules since…"

June Perry replied Jul 6, 2011 to Cone 6 firing schedule for SCM etc glazes

23 Jun 27, 2013
Reply by Norm Stuart

RSS

Videos

  • Add Videos
  • View All

Use These Links to Support Us

Low cost flat lapping disc can be used on you potters wheel if you, drill bat pin holes in it, and provide a trickle of water to cool it. At amazon.com, 120 grit for aggressive material removal. Click the image to purchase 

Members have had great things to say about John Britt's new book, Mid-Range Glazes. Click the image to buy from Amazon.com

Purchase Glazes Cone 6 by Michael Bailey, The Potters Book of Glaze Recipes by Emmanuel Cooper, or Making Marks by Robin Hopper, all available at amazon.comMastering Cone 6 Glazes by John Hesselberth & Ron Roy is now out of print.

Harbor Freight is a great place to find unbeatable prices for better HVLP spray guns with stainless steel parts and serviceable economy models, as well as detail guns, all tested by our members for spraying glazes, as well as compressors to power the guns. As yet no one has tested and commented on the remarkably inexpensive air brushes at harbor freight.

The critter siphon gun is a spray alternative that is well liked by some of our members, and is available at amazon.

Amazon is also a competitive source for photo light tents for shooting professional quality pictures of your work. They also have the EZ Cube brand favored by several of our members. You might also want to purchase the book Photographing Arts, Crafts and Collectibles . . .

If you are up to creating videos of your work or techniques you might want to invest in a flip video camera

Following are a few scales useful for potters. Ohaus Triple Pro Mechanical Triple Beam Balance, 2610g x 0.1g, with Tare $169.00

And finally a low cost clone of the OHaus. The Adam Equipment TBB2610T Triple Beam Mechanical Balance With Tare Beam $99.62

ebay is a great alternative for many tools and the equipment used in the ceramics studio - kilns, wheels, extruders, slab rollers are often listed there both new and used.

Tips for Members

If you just want to spout off, it is best accomplished as a blog posting. If you want to get more guidance and ideas from other members, ask a question as a new discussion topic. In the upper right corner of the lists for both types of posting, you will find an "+Add " button. Clicking it will open an editor where you create your posting. 4/16/2014

© 2024   Created by Andrea Wolf.   Powered by

Badges  |  Report an Issue  |  Terms of Service