martha peddicord's Discussions (27)

Discussions Replied To (10) Replies Latest Activity

"I tried dipping some test pieces last firing, have been spraying and doing OK, but w…"

martha peddicord replied Apr 21, 2012 to The Companion Glazes - Modifiers and Complements to SCM

46 Sep 29, 2017
Reply by Norm Stuart

"OK! The results, very nice surface, no roughness.  I used SCM W with red orange over…"

martha peddicord replied May 3, 2011 to What firing schedules have you used with the SH glazes?

16 Jul 5, 2011
Reply by June Perry

"Concerning the application of SCM, SH said to use it as 80% of the over all thicknes…"

martha peddicord replied May 1, 2011 to Steven's Glazes - Tested at Cone 6

57 May 1, 2011
Reply by martha peddicord

"Thank you, I enjoyed your pics.  Very nice results. At the school I attend, several…"

martha peddicord replied Apr 30, 2011 to What firing schedules have you used with the SH glazes?

16 Jul 5, 2011
Reply by June Perry

"Thanks for the replies.   CM, Steven talked a good bit about using as little electri…"

martha peddicord replied Apr 27, 2011 to What firing schedules have you used with the SH glazes?

16 Jul 5, 2011
Reply by June Perry

"Thanks for that input. Does this mean that we need to not combine the MC6 glazes and…"

martha peddicord replied Apr 21, 2011 to Steven's Glazes - Tested at Cone 6

57 May 1, 2011
Reply by martha peddicord

"So are you saying that even tho cones are about heat work, a combination of temp and…"

martha peddicord replied Apr 20, 2011 to Steven's Glazes - Tested at Cone 6

57 May 1, 2011
Reply by martha peddicord

"I wish I knew.  I had been dropping 500*/hr from peak to 1800, holding there for 30…"

martha peddicord replied Apr 20, 2011 to Steven's Glazes - Tested at Cone 6

57 May 1, 2011
Reply by martha peddicord

"I would appreciate some thoughts on firing schedules for the SH glazes.  I was getti…"

martha peddicord replied Apr 19, 2011 to Steven's Glazes - Tested at Cone 6

57 May 1, 2011
Reply by martha peddicord

"Hi, Stacy,    I am firing on bisque, just got the glazes from a March workshop with…"

martha peddicord replied Apr 14, 2011 to Steven's Glazes - Tested at Cone 6

57 May 1, 2011
Reply by martha peddicord

RSS

Videos

  • Add Videos
  • View All

Use These Links to Support Us

Low cost flat lapping disc can be used on you potters wheel if you, drill bat pin holes in it, and provide a trickle of water to cool it. At amazon.com, 120 grit for aggressive material removal. Click the image to purchase 

Members have had great things to say about John Britt's new book, Mid-Range Glazes. Click the image to buy from Amazon.com

Purchase Glazes Cone 6 by Michael Bailey, The Potters Book of Glaze Recipes by Emmanuel Cooper, or Making Marks by Robin Hopper, all available at amazon.comMastering Cone 6 Glazes by John Hesselberth & Ron Roy is now out of print.

Harbor Freight is a great place to find unbeatable prices for better HVLP spray guns with stainless steel parts and serviceable economy models, as well as detail guns, all tested by our members for spraying glazes, as well as compressors to power the guns. As yet no one has tested and commented on the remarkably inexpensive air brushes at harbor freight.

The critter siphon gun is a spray alternative that is well liked by some of our members, and is available at amazon.

Amazon is also a competitive source for photo light tents for shooting professional quality pictures of your work. They also have the EZ Cube brand favored by several of our members. You might also want to purchase the book Photographing Arts, Crafts and Collectibles . . .

If you are up to creating videos of your work or techniques you might want to invest in a flip video camera

Following are a few scales useful for potters. Ohaus Triple Pro Mechanical Triple Beam Balance, 2610g x 0.1g, with Tare $169.00

And finally a low cost clone of the OHaus. The Adam Equipment TBB2610T Triple Beam Mechanical Balance With Tare Beam $99.62

ebay is a great alternative for many tools and the equipment used in the ceramics studio - kilns, wheels, extruders, slab rollers are often listed there both new and used.

Tips for Members

If you just want to spout off, it is best accomplished as a blog posting. If you want to get more guidance and ideas from other members, ask a question as a new discussion topic. In the upper right corner of the lists for both types of posting, you will find an "+Add " button. Clicking it will open an editor where you create your posting. 4/16/2014

© 2025   Created by Andrea Wolf.   Powered by

Badges  |  Report an Issue  |  Terms of Service