I fired my first pots thrown with P-5 porcelain and was very disappointed with the results. I had plates warp and bowls go out of round. Having never fired porcelain before I can only guess the kiln was fired too hot. Any thoughts

Views: 2389

Reply to This

Replies to This Discussion

Thank you guys for your help, I have much to learn and your wisdom is greatly appreciated.



Norm Stuart said:

Joseph - It's true that the the COE of commercial clays tend to increase as the maturity cone declines. This is an artifact of cost control as sodium and potassium are the least costly way to reduce the cone maturity.

Using lithium as a flux, you can make extremely low COE Cone 6 "flameware clay" - far lower than the COE of any Cone 10 clay. Flameware is a clay body which can be heated over the burner on a stove because the difference in expansion between the hot parts of the ware and the cold part is not enough to fracture to pot.  Flameware requires an engobe as most glaze can't withstand thermal shock.

Boron, a flux in Cone 6 and Cone 06 glaze, does not increase COE and also helps glaze and clay bodies with a COE mismatch fit properly.  Ceramic research papers show that boron allows the glaze to have one structure where it meets the clay body and a different structure further from the clay body.  This could be a reason Cone 6 and Cone 06 glazes fit Cone 10 clays with very low COEs. 



But this doesn't explain Cone 10 glazes without boron and seeming excessive COE mismatches working out well, which leaves me wondering when does a COE mismatch create problems?  It's seemingly more than just the numbers alone. Perhaps glaze strength is the missing factor.

One example is Pete Pinnell's Cone 10 Weathered Bronze Green with a COE of 8.7 which seems a bad match for a Cone 10 clay with a COE of 3.46 like Laguna 373 Dark Brown yet the glaze fits well.

One of Pete's students discovered this glaze is wide-firing enough to also work at Cone 6, though I find it's more reliable at Cone 6 after adding 20% Ferro Frit 3269 (shown below). So it's become a popular Cone 6 glaze as well.

Reply to Discussion

RSS

Videos

  • Add Videos
  • View All

Use These Links to Support Us

Low cost flat lapping disc can be used on you potters wheel if you, drill bat pin holes in it, and provide a trickle of water to cool it. At amazon.com, 120 grit for aggressive material removal. Click the image to purchase 

Members have had great things to say about John Britt's new book, Mid-Range Glazes. Click the image to buy from Amazon.com

Purchase Glazes Cone 6 by Michael Bailey, The Potters Book of Glaze Recipes by Emmanuel Cooper, or Making Marks by Robin Hopper, all available at amazon.comMastering Cone 6 Glazes by John Hesselberth & Ron Roy is now out of print.

Harbor Freight is a great place to find unbeatable prices for better HVLP spray guns with stainless steel parts and serviceable economy models, as well as detail guns, all tested by our members for spraying glazes, as well as compressors to power the guns. As yet no one has tested and commented on the remarkably inexpensive air brushes at harbor freight.

The critter siphon gun is a spray alternative that is well liked by some of our members, and is available at amazon.

Amazon is also a competitive source for photo light tents for shooting professional quality pictures of your work. They also have the EZ Cube brand favored by several of our members. You might also want to purchase the book Photographing Arts, Crafts and Collectibles . . .

If you are up to creating videos of your work or techniques you might want to invest in a flip video camera

Following are a few scales useful for potters. Ohaus Triple Pro Mechanical Triple Beam Balance, 2610g x 0.1g, with Tare $169.00

And finally a low cost clone of the OHaus. The Adam Equipment TBB2610T Triple Beam Mechanical Balance With Tare Beam $99.62

ebay is a great alternative for many tools and the equipment used in the ceramics studio - kilns, wheels, extruders, slab rollers are often listed there both new and used.

Tips for Members

If you just want to spout off, it is best accomplished as a blog posting. If you want to get more guidance and ideas from other members, ask a question as a new discussion topic. In the upper right corner of the lists for both types of posting, you will find an "+Add " button. Clicking it will open an editor where you create your posting. 4/16/2014

© 2024   Created by Andrea Wolf.   Powered by

Badges  |  Report an Issue  |  Terms of Service