Assad Black - Electric Mid&Hi Fired Ceramics2024-03-28T17:41:00Zhttps://cone6pots.ning.com/forum/topics/assad-black?commentId=2103784%3AComment%3A121999&feed=yes&xn_auth=noI'd not heard of 'score-no-mo…tag:cone6pots.ning.com,2015-06-01:2103784:Comment:1223012015-06-01T20:34:24.742ZGina Skillingshttps://cone6pots.ning.com/profile/GinaSkillings
<p>I'd not heard of 'score-no-more' before. I've made and used paper clay for repairs and mixed up some of Lana Wilson's magic water hoping that some in class that don't score as well as they should would be helped a little with Lana's mix. I may try out some 'score-no-more' when there's lots of tiny little bits to add to a piece. </p>
<p>I hope you'll post a photo and update of your experiment. </p>
<p>I'd not heard of 'score-no-more' before. I've made and used paper clay for repairs and mixed up some of Lana Wilson's magic water hoping that some in class that don't score as well as they should would be helped a little with Lana's mix. I may try out some 'score-no-more' when there's lots of tiny little bits to add to a piece. </p>
<p>I hope you'll post a photo and update of your experiment. </p> In this particular instance I…tag:cone6pots.ning.com,2015-06-01:2103784:Comment:1221932015-06-01T18:27:13.190ZNorm Stuarthttps://cone6pots.ning.com/profile/NormStuart
<p>In this particular instance I did apply the oxides mixed with flux to the unfired fairly wet clay.</p>
<p></p>
<p>I'll be interested to see what it looks like after a bisque, and again after high fire. I may end up later applying a layer of some sort of clear glaze over the surface.</p>
<p></p>
<p>When I no special ideas for a project I sometimes make something simple just to use as a test tile for exploring the boundaries of glazing, which is what I find more interesting.</p>
<p></p>
<p>I…</p>
<p>In this particular instance I did apply the oxides mixed with flux to the unfired fairly wet clay.</p>
<p></p>
<p>I'll be interested to see what it looks like after a bisque, and again after high fire. I may end up later applying a layer of some sort of clear glaze over the surface.</p>
<p></p>
<p>When I no special ideas for a project I sometimes make something simple just to use as a test tile for exploring the boundaries of glazing, which is what I find more interesting.</p>
<p></p>
<p>I tore ~4mm thick, textured clay into strips and pieces and draped onto a bowl with a base then added on the bottom. Due to the thinness of each clay strip, I used Pat Horsley's "score-no-more" brushed onto the surface to attach each piece without scoring or applying pressure.</p>
<p><a rel="nofollow" href="https://groups.yahoo.com/neo/groups/paperclay/conversations/topics/542" target="_blank">Pat Horsley's Score-No-More</a></p>
<p></p>
<p>It's porous like a basket so I wanted to experiment with two primary colors, black interior and white exterior, which won't melt through the basket structure to affect the other color.</p>
<p></p>
<p>New things keep my interest. I've often said if I don't find at least three new things which don't work with experimental pieces like this, I didn't didn't try hard enough.</p>
<p></p>
<p>This idea started with "Tarp Weights" for a new tarp - tarps cover our raw materials stored on pallets.</p>
<p></p>
<p>Someone had used a fairly open (porous) clay for the weights, so after they were bisqued I dipped them in a solution of water mixed with two water soluble fluxes - lithium carbonate and potassium carbonate. After firing to Cone 6 they were completely densified with a surface just glassy enough that they'll stay clean.</p>
<p></p>
<p>If we apply glaze to the surface of these weights they quickly chip off pieces of sharp glass as the tarps are thrown open and the tarp-weight hits something hard.</p> The metallic gold recipe you…tag:cone6pots.ning.com,2015-06-01:2103784:Comment:1221142015-06-01T17:52:27.426ZGina Skillingshttps://cone6pots.ning.com/profile/GinaSkillings
<p>The metallic gold recipe you mentioned may be similar to one in the studio where I teach. I'm hoping to end it's use eventually because of the manganese as our kilns are right in the studio and I have ventilation concerns. </p>
<p>Are you applying your 'underglazes' before bisque? I just ran a test of a glaze I made up several years ago that at the time was very dry but this time it was quite satin. Perhaps glazes materials, temperature, different kiln, different firing rates, etc? It is so…</p>
<p>The metallic gold recipe you mentioned may be similar to one in the studio where I teach. I'm hoping to end it's use eventually because of the manganese as our kilns are right in the studio and I have ventilation concerns. </p>
<p>Are you applying your 'underglazes' before bisque? I just ran a test of a glaze I made up several years ago that at the time was very dry but this time it was quite satin. Perhaps glazes materials, temperature, different kiln, different firing rates, etc? It is so out of range in limit formulas I may not continue with it but was thinking of a sculptural piece. </p>
<p>The Assad Black I'm not planning to use on functional. I was looking for a nice semi-matte for sculpture that doesn't have manganese.</p> It has 4.2 copper carb
I also…tag:cone6pots.ning.com,2015-06-01:2103784:Comment:1220382015-06-01T17:16:03.055ZGina Skillingshttps://cone6pots.ning.com/profile/GinaSkillings
<p>It has 4.2 copper carb</p>
<p>I also slow cooled at 100% per hour from top temp to 1400</p>
<p></p>
<p>It has 4.2 copper carb</p>
<p>I also slow cooled at 100% per hour from top temp to 1400</p>
<p></p> The glaze with the added iron…tag:cone6pots.ning.com,2015-06-01:2103784:Comment:1221922015-06-01T17:07:11.220ZNorm Stuarthttps://cone6pots.ning.com/profile/NormStuart
<p>The glaze with the added iron oxide is very nice. What percentage copper carbonate does it contain?</p>
<p>Congratulations.</p>
<p></p>
<p>I think this an interesting photo from Digitalfire. 50% Ferro Frit 3134 with 50% of various oxides.</p>
<p><img alt="http://digitalfire.com/4sight/images/pictures/kilnezojat.jpg" src="http://digitalfire.com/4sight/images/pictures/kilnezojat.jpg"></img></p>
<p></p>
<p>If you didn't know that copper is the most easily leeched colorant, which can make otherwise stable glazes unstable, you could probably guess that from looking at the crystalline structure on the surface of the 50% Black…</p>
<p>The glaze with the added iron oxide is very nice. What percentage copper carbonate does it contain?</p>
<p>Congratulations.</p>
<p></p>
<p>I think this an interesting photo from Digitalfire. 50% Ferro Frit 3134 with 50% of various oxides.</p>
<p><img alt="http://digitalfire.com/4sight/images/pictures/kilnezojat.jpg" src="http://digitalfire.com/4sight/images/pictures/kilnezojat.jpg"/></p>
<p></p>
<p>If you didn't know that copper is the most easily leeched colorant, which can make otherwise stable glazes unstable, you could probably guess that from looking at the crystalline structure on the surface of the 50% Black Copper Oxide with 50% Ferro Frit 3134.</p>
<p></p>
<p>xxxxxxxxxxxxxxxxxxxxxxxx</p>
<p>I'm applying a black and white "underglaze" to a piece I hope will be look very dry. I'm using two very refractory colors.</p>
<p>95% Iron Chromate with 5% Cobalt Oxide for the black</p>
<p>100% Titanium Dioxide for the white.</p>
<p>Both are mixed with bentonite and two fluxes.</p>
<p>1.) Potassium Carbonate</p>
<p>2.) Lithium Carbonate</p>
<p></p>
<p>Of course my black surface will not be food safe.</p>
<p></p>
<p>Effectively the surface of the clay will become an important component of the glaze, as with this recipes for a metallic gold.</p>
<p></p>
<table border="0" cellspacing="0" width="436">
<colgroup><col width="81"></col><col width="355"></col></colgroup><tbody><tr><td class="xl68" align="right" height="28" width="81">20.0%</td>
<td class="xl67" width="355"> Red Art Clay</td>
</tr>
<tr><td class="xl68" align="right" height="32">60.0%</td>
<td class="xl67"> Manganese Dioxide</td>
</tr>
<tr><td class="xl68" align="right" height="28">10.0%</td>
<td class="xl67"> Grolleg Kaolin aka China Clay</td>
</tr>
<tr><td class="xl68" align="right" height="25">10.0%</td>
<td class="xl67"> Copper Oxide or 13.9% Copper Carbonate</td>
</tr>
</tbody>
</table> I unloaded my tests this morn…tag:cone6pots.ning.com,2015-06-01:2103784:Comment:1221132015-06-01T15:43:44.562ZGina Skillingshttps://cone6pots.ning.com/profile/GinaSkillings
<p>I unloaded my tests this morning. Assad Black does indeed go black but I'm glad I added 10% RIO to one test as it produced the glaze I was hoping for. It may have a slightly different surface next time I fire it as this was my new kiln's first load and it went to cone 7. Black Assad as printed is on the test tile and the version with RIO is on the bell. …<a href="http://storage.ning.com/topology/rest/1.0/file/get/3127172079?profile=original" target="_self"><img class="align-full" src="http://storage.ning.com/topology/rest/1.0/file/get/3127172079?profile=RESIZE_1024x1024" width="721"></img></a></p>
<p>I unloaded my tests this morning. Assad Black does indeed go black but I'm glad I added 10% RIO to one test as it produced the glaze I was hoping for. It may have a slightly different surface next time I fire it as this was my new kiln's first load and it went to cone 7. Black Assad as printed is on the test tile and the version with RIO is on the bell. <a href="http://storage.ning.com/topology/rest/1.0/file/get/3127172079?profile=original" target="_self"><img width="721" src="http://storage.ning.com/topology/rest/1.0/file/get/3127172079?profile=RESIZE_1024x1024" width="721" class="align-full"/></a></p> Oh yes, thanks Norm. I had on…tag:cone6pots.ning.com,2015-05-30:2103784:Comment:1219992015-05-30T18:04:06.576ZGina Skillingshttps://cone6pots.ning.com/profile/GinaSkillings
<p>Oh yes, thanks Norm. I had once known that but of course forgotten. I should know on Monday if the 4.2% of copper carb makes this black. It has some zinc which the combo can make purple so perhaps it will happen. </p>
<p>Oh yes, thanks Norm. I had once known that but of course forgotten. I should know on Monday if the 4.2% of copper carb makes this black. It has some zinc which the combo can make purple so perhaps it will happen. </p> Once the temperature rises to…tag:cone6pots.ning.com,2015-05-30:2103784:Comment:1219982015-05-30T17:51:31.873ZNorm Stuarthttps://cone6pots.ning.com/profile/NormStuart
<p>Once the temperature rises to just 554 F (290 C) Copper Carbonate (Cu2 (OH)2 CO3) quickly breaks down into Black Copper Oxide (CuO), Carbon Dioxide (CO2), and steam (H2O). So they're interchangeable with a weight adjustment just like Cobalt Carbonate and Cobalt Oxide.</p>
<p></p>
<p>(Cu2 (OH)2 CO3) = 2 CuO + H2O + CO2</p>
<p></p>
<p>You can also purchase Red Copper Oxide which has to remain coated with oil to remain stable, otherwise it slowly oxidizes into Black Copper Oxide at room…</p>
<p>Once the temperature rises to just 554 F (290 C) Copper Carbonate (Cu2 (OH)2 CO3) quickly breaks down into Black Copper Oxide (CuO), Carbon Dioxide (CO2), and steam (H2O). So they're interchangeable with a weight adjustment just like Cobalt Carbonate and Cobalt Oxide.</p>
<p></p>
<p>(Cu2 (OH)2 CO3) = 2 CuO + H2O + CO2</p>
<p></p>
<p>You can also purchase Red Copper Oxide which has to remain coated with oil to remain stable, otherwise it slowly oxidizes into Black Copper Oxide at room temperature. Even coated with oil Red Copper Oxide about half will be converted after 12 months, resulting in a brown color on it's eventual pathway to black.</p>
<p></p>
<p>Cu2O + O = 2 CuO</p> Thanks Norm. The recipe calls…tag:cone6pots.ning.com,2015-05-30:2103784:Comment:1219362015-05-30T17:00:42.876ZGina Skillingshttps://cone6pots.ning.com/profile/GinaSkillings
<p>Thanks Norm. The recipe calls for copper carbonate, not oxide. That is what surprises me. <br></br> <br></br> <cite>Norm Stuart said:</cite></p>
<blockquote cite="http://cone6pots.ning.com/forum/topics/assad-black?commentId=2103784%3AComment%3A121991&xg_source=msg_com_forum#2103784Comment121991"><div><div class="xg_user_generated"><p>This is Digitalfire's commentary on Copper Oxide, which is a black matte powder.…</p>
<p></p>
<p></p>
</div>
</div>
</blockquote>
<p>Thanks Norm. The recipe calls for copper carbonate, not oxide. That is what surprises me. <br/> <br/> <cite>Norm Stuart said:</cite></p>
<blockquote cite="http://cone6pots.ning.com/forum/topics/assad-black?commentId=2103784%3AComment%3A121991&xg_source=msg_com_forum#2103784Comment121991"><div><div class="xg_user_generated"><p>This is Digitalfire's commentary on Copper Oxide, which is a black matte powder.</p>
<p></p>
<p><a rel="nofollow" href="http://digitalfire.com/4sight/material/copper_oxide_black_237.html" target="_blank">http://digitalfire.com/4sight/material/copper_oxide_black_237.html</a></p>
<p></p>
<p><em>"One of the oldest colorants used by potters. It is a popular source of copper in glazes and glass. It is a very strong flux, in a mix of 50% Ferro borax frit 3134 it will dissolve a firebrick crucible at cone 6! It is the most stable form of oxidized copper (Cuprous oxide oxidizes to cupric oxide in normal firings).</em><br/> <br/> <em>The oxide form of copper can give a speckled color in glazes whereas the carbonate form will give a more uniform effect.</em><br/> <br/> <em><strong>Copper normally produces green colors in amounts to 5% where it moves toward black in oxidation firing.</strong> </em></p>
<p><em>In reduction firing, it turns to Cu2O and gives vibrant red hues. It the glaze is fluid copper will tend to crystallize heavily. See CuO and Cu2O in the oxides database for more information.</em><br/> <br/> <em>Above 1025C copper becomes increasingly volatile and its crystalline structure breaks down. At 1325C CuO melts. This can affect the color of other glazes pieces in the kiln. Glazes containing copper can change significantly because of loss of copper. Some potters alternate between reduction and oxidation, and even put a dish filled with copper carbonate in the center of the kiln to minimize this phenomenon.</em><br/> <br/> <em>There are many workable copper ores (i.e. tenorite, cuprite). Source: American Chemet Corp., 708-948-0800 FAX 708-948-0811</em><br/> <br/> <em>See also: "Coloring Mechanism of Peach Bloom Copper Red Glazes" written by four technicians from China published in Dec 91 Bulletin of the American Ceramic Society."</em></p>
<p></p>
<p></p>
<p>I'd guess the color also depends on the glaze chemistry. But here's two test tiles, the first with 4% CuO the second 6% CuO.</p>
<p>This first test tile is <strong>100% Ferro Frit 3269 mixed with 4% black copper oxide</strong>.</p>
<p><a target="_self" href="http://storage.ning.com/topology/rest/1.0/file/get/3127172155?profile=original"><img width="721" class="align-full" src="http://storage.ning.com/topology/rest/1.0/file/get/3127172155?profile=RESIZE_1024x1024" width="721"/></a></p>
<p>My second tile is the same <strong>100% Ferro Frit 3269 with 6% black copper oxide</strong>. If you look close the dark, almost black glaze contains what looks like metallic copper crystals.</p>
<p></p>
<p><a target="_self" href="http://storage.ning.com/topology/rest/1.0/file/get/3127173572?profile=original"><img width="721" class="align-full" src="http://storage.ning.com/topology/rest/1.0/file/get/3127173572?profile=RESIZE_1024x1024" width="721"/></a></p>
<p>If you want to dissolve Black Copper Oxide for any reason, it's soluble in Ammonia.</p>
<p>Not having Britt's book I'd be interested in the recipe.</p>
<p></p>
<p></p>
</div>
</div>
</blockquote> Thanks George. I will fire th…tag:cone6pots.ning.com,2015-05-30:2103784:Comment:1219332015-05-30T16:53:53.900ZGina Skillingshttps://cone6pots.ning.com/profile/GinaSkillings
<p>Thanks George. I will fire the tests I have mixed up first.<br></br> <br></br> <cite>George Lewter said:</cite></p>
<blockquote cite="http://cone6pots.ning.com/forum/topics/assad-black?commentId=2103784%3AComment%3A121991&xg_source=msg_com_forum#2103784Comment121986"><div><div class="xg_user_generated"><p><a href="http://cone6pots.ning.com/profile/JohnBritt" target="_self">John Britt</a> is a member here (though not very active). Why don't you message him directly and avoid…</p>
</div>
</div>
</blockquote>
<p>Thanks George. I will fire the tests I have mixed up first.<br/> <br/> <cite>George Lewter said:</cite></p>
<blockquote cite="http://cone6pots.ning.com/forum/topics/assad-black?commentId=2103784%3AComment%3A121991&xg_source=msg_com_forum#2103784Comment121986"><div><div class="xg_user_generated"><p><a href="http://cone6pots.ning.com/profile/JohnBritt" target="_self">John Britt</a> is a member here (though not very active). Why don't you message him directly and avoid intermediaries?</p>
</div>
</div>
</blockquote>