Jeff Poulter's Discussions (111)

Discussions Replied To (98) Replies Latest Activity

"Just go to her oil spot page and it is #1 and #2.  You just use one over the other.…"

Jeff Poulter replied Mar 30, 2014 to ^6 oil spot MFA thesis

18 Jun 11, 2017
Reply by Joseph Fireborn

"I have had really good luck with the recipes that I got from Alisa Clausen's page.  …"

Jeff Poulter replied Mar 30, 2014 to ^6 oil spot MFA thesis

18 Jun 11, 2017
Reply by Joseph Fireborn

"Thanks Norm!       I had done a search the first time, but it was on my phone when I…"

Jeff Poulter replied Mar 28, 2014 to Alberta Slip II

2 Mar 28, 2014
Reply by Jeff Poulter

"I have made a couple of recipes from down under and have used EPK in place of the Ec…"

Jeff Poulter replied Mar 27, 2014 to Dry Glazes, Slips, Terra Sigilatta and Engobes for Cone 6 - Recipes and Techniques

17 Jun 2, 2015
Reply by Norm Stuart

"Here are some pics of pots using JJF.  The 2  are layered with other glazes, while t…"

Jeff Poulter replied Mar 20, 2014 to Issues with Jen's Juicy Fruit - Only problem glaze in a full load of tests?????

11 Mar 24, 2014
Reply by Ayjay

"I seem to recall this same problem when using it by itself.  When layered with other…"

Jeff Poulter replied Mar 20, 2014 to Issues with Jen's Juicy Fruit - Only problem glaze in a full load of tests?????

11 Mar 24, 2014
Reply by Ayjay

"Hi George,      What were the deletes on this page?  Just curious.....  jhp"

Jeff Poulter replied Mar 19, 2014 to Slip Glazes

4 Mar 19, 2014
Reply by George Lewter

"No, it is supplying the needed power to heat the kiln, but is doing it at a constant…"

Jeff Poulter replied Feb 26, 2014 to gas to electric conversion

11 Feb 26, 2014
Reply by Jeff Poulter

"I think Euclids would be an excellent place to tell you how many elements you will n…"

Jeff Poulter replied Feb 25, 2014 to gas to electric conversion

11 Feb 26, 2014
Reply by Jeff Poulter

"Some more..."

Jeff Poulter replied Feb 25, 2014 to Refire Test Ring from previous Cone 6 Test to 1000c and Intereting Results

9 Feb 25, 2014
Reply by Norm Stuart

RSS

Videos

  • Add Videos
  • View All

Use These Links to Support Us

Low cost flat lapping disc can be used on you potters wheel if you, drill bat pin holes in it, and provide a trickle of water to cool it. At amazon.com, 120 grit for aggressive material removal. Click the image to purchase 

Members have had great things to say about John Britt's new book, Mid-Range Glazes. Click the image to buy from Amazon.com

Purchase Glazes Cone 6 by Michael Bailey, The Potters Book of Glaze Recipes by Emmanuel Cooper, or Making Marks by Robin Hopper, all available at amazon.comMastering Cone 6 Glazes by John Hesselberth & Ron Roy is now out of print.

Harbor Freight is a great place to find unbeatable prices for better HVLP spray guns with stainless steel parts and serviceable economy models, as well as detail guns, all tested by our members for spraying glazes, as well as compressors to power the guns. As yet no one has tested and commented on the remarkably inexpensive air brushes at harbor freight.

The critter siphon gun is a spray alternative that is well liked by some of our members, and is available at amazon.

Amazon is also a competitive source for photo light tents for shooting professional quality pictures of your work. They also have the EZ Cube brand favored by several of our members. You might also want to purchase the book Photographing Arts, Crafts and Collectibles . . .

If you are up to creating videos of your work or techniques you might want to invest in a flip video camera

Following are a few scales useful for potters. Ohaus Triple Pro Mechanical Triple Beam Balance, 2610g x 0.1g, with Tare $169.00

And finally a low cost clone of the OHaus. The Adam Equipment TBB2610T Triple Beam Mechanical Balance With Tare Beam $99.62

ebay is a great alternative for many tools and the equipment used in the ceramics studio - kilns, wheels, extruders, slab rollers are often listed there both new and used.

Tips for Members

If you just want to spout off, it is best accomplished as a blog posting. If you want to get more guidance and ideas from other members, ask a question as a new discussion topic. In the upper right corner of the lists for both types of posting, you will find an "+Add " button. Clicking it will open an editor where you create your posting. 4/16/2014

© 2024   Created by Andrea Wolf.   Powered by

Badges  |  Report an Issue  |  Terms of Service