What is your experience with ceramics in general. (Long answer encouraged)
What is your current involvement with electric fired ceramics? (long answer encouraged)
Create technical online support materials including articles, databases, software.
All our content is viewable by the public. Why do you want to be a member, when you can already see everything as a non-member?
Ideas on the kinds of problems people are facing to give me ideas of the kinds of things I want to research to help them. I have been doing pottery since 1972 and my heart has always been at cone 6, successes there have been highlights of my ceramics life even though I have always had access to a free cone 10 reduction kiln in the studio at Plainsman Clays.
Where do you work on your ceramics projects?
Do you have your own, or participate in other ceramics Websites:
tony - yesterday i asked you about an alberta slip formula that you had mentioned in a previous message. sorry to have bothered you as i did a bit more searching and found the answer on the plainsmen clay alberta slip page. sometimes it takes just a bit more persistence to find the answer. thanks, though, for all your efforts to make ^6 website and insight more accessible. i really appreciate the work.
Low cost flat lapping disc can be used on you potters wheel if you, drill bat pin holes in it, and provide a trickle of water to cool it. At amazon.com, 120 grit for aggressive material removal. Click the image to purchase
Members have had great things to say about John Britt's new book, Mid-Range Glazes. Click the image to buy from Amazon.com
If you just want to spout off, it is best accomplished as a blog posting. If you want to get more guidance and ideas from other members, ask a question as a new discussion topic. In the upper right corner of the lists for both types of posting, you will find an "+Add " button. Clicking it will open an editor where you create your posting. 4/16/2014