Just a couple of things that came to mind whilst in the garage earlier...

I don't have any batts, and cut my pots from the wheel after throwing. To avoid making hand prints on the pots I remove slurry with a stick. I've never been able to avoid getting hand prints by this alone so I use a hot air gun - the type for paint stripping to dry the pots a little. So far I've had no problems but I wonder if it may cause any problems, with drying the surface too fast? 

I also threw a 1kg lump into a vase. I have struggled getting height but think I'm improving, I was wondering what sort of height you guys could get from this size of clay, a cylinder about 3inch diameter? 

Views: 381

Reply to This

Replies to This Discussion


The plaster bats I use have a plastic piece that attaches to the wheel head and the bats are formed to mate with it. real easy to change. If your wheel head does not have holes for pins they could be drilled when you get bats. mine are just Allen Head screws with a nut and washer to hold them on. We used Masonite bats when I was in college. The holes wallow out in time and that sucks. I haven't tried the HYDRO-BATS but they sound like a step up from plaster. The company that makes the plaster system is Pure and Simple Pottery Products. Bates make it so you can just keep throwing, till you run out of bats. I think it helps you form a rhythm. You can measure out ten balls or so and just work your way through them. happy firing

Tom Humphries said:

Are you guys using a clay pad to sit your bats on, or bat pin system? My wheel doesn't currently have any holes drilled, but seems a bit of a faff to make clay pads

There are a lot of factors to consider,one is how soft is your clay to start with,second do you use so much water to throw or utilize the slip that gathers in your hands. How much work can your clay withstand?

Reply to Discussion

RSS

Videos

  • Add Videos
  • View All

Use These Links to Support Us

Low cost flat lapping disc can be used on you potters wheel if you, drill bat pin holes in it, and provide a trickle of water to cool it. At amazon.com, 120 grit for aggressive material removal. Click the image to purchase 

Members have had great things to say about John Britt's new book, Mid-Range Glazes. Click the image to buy from Amazon.com

Purchase Glazes Cone 6 by Michael Bailey, The Potters Book of Glaze Recipes by Emmanuel Cooper, or Making Marks by Robin Hopper, all available at amazon.comMastering Cone 6 Glazes by John Hesselberth & Ron Roy is now out of print.

Harbor Freight is a great place to find unbeatable prices for better HVLP spray guns with stainless steel parts and serviceable economy models, as well as detail guns, all tested by our members for spraying glazes, as well as compressors to power the guns. As yet no one has tested and commented on the remarkably inexpensive air brushes at harbor freight.

The critter siphon gun is a spray alternative that is well liked by some of our members, and is available at amazon.

Amazon is also a competitive source for photo light tents for shooting professional quality pictures of your work. They also have the EZ Cube brand favored by several of our members. You might also want to purchase the book Photographing Arts, Crafts and Collectibles . . .

If you are up to creating videos of your work or techniques you might want to invest in a flip video camera

Following are a few scales useful for potters. Ohaus Triple Pro Mechanical Triple Beam Balance, 2610g x 0.1g, with Tare $169.00

And finally a low cost clone of the OHaus. The Adam Equipment TBB2610T Triple Beam Mechanical Balance With Tare Beam $99.62

ebay is a great alternative for many tools and the equipment used in the ceramics studio - kilns, wheels, extruders, slab rollers are often listed there both new and used.

Tips for Members

If you just want to spout off, it is best accomplished as a blog posting. If you want to get more guidance and ideas from other members, ask a question as a new discussion topic. In the upper right corner of the lists for both types of posting, you will find an "+Add " button. Clicking it will open an editor where you create your posting. 4/16/2014

© 2024   Created by Andrea Wolf.   Powered by

Badges  |  Report an Issue  |  Terms of Service